A burst supply line, an overflowing tub, or a storm surge under the back door doesn't wait for business hours, and neither do we. Our Hunter-based teams arrive with truck-mount extractors, moisture meters, and drying gear staged and ready to go.
Hirex Water Damage started because homeowners in Hunter, ND kept telling us the same story: a national hotline picked up, put them on hold, and then subcontracted the job out to whoever was cheapest and closest. Every technician on our Hunter roster is a Hirex Water Damage employee, not a gig-app contractor pulled from a random directory.
Each lead tech holds an IICRC Water Restoration Technician certification and has personally handled clean-water, gray-water, and contaminated black-water losses, so Structural Drying in Hunter isn't a side service we tacked on — it's the reason the company exists. We're fully insured and licensed to work anywhere in Hunter, ND, so you're protected from the moment our truck pulls into the driveway.
We keep a stocked warehouse inside Hunter, ND so equipment never has to be trucked in from another region, which is the difference between a 45-minute arrival and a next-day one.
Anyone in Hunter who has had a supply line fail overnight knows the real cost isn't the leak itself, it's how long the standing water sits before someone with the right equipment arrives. That's the gap Hirex Water Damage was built to close, one Hunter call at a time.
Not every leak announces itself with a flooded floor. A lot of the worst damage we see in Hunter started small and got ignored for weeks. Here's what tells us a property needs professional attention rather than a mop and a fan:
If you're nodding along to any of these, get ahead of it now rather than later — our Hunter dispatcher will give you an honest read on urgency, not a sales pitch.
We size the Hunter response to the actual damage — a single-room extraction gets a two-person crew, a commercial loss gets the full fleet — nothing gets a cookie-cutter response.
We arrive with submersible pumps and truck-mount extractors that get standing water out of a Hunter property before it soaks deeper into the subfloor. Every extraction job includes moisture mapping so we know exactly which materials are still holding water once the visible flooding is gone.
Once water is out, we bring in commercial air movers and LGR dehumidifiers, positioned using psychrometric readings rather than guesswork, with daily drying logs so you can see the numbers improving, not just take our word for it.
For Hunter homeowners, that means drywall removal at the flood cut line, subfloor assessment, and content pack-out for anything that can be saved, with clear photo documentation at every stage for your insurance claim.
Hunter businesses and property managers get a dedicated project lead, after-hours crews, and equipment scaled to square footage rather than a single-crew response — we know a flooded lobby or a leaking unit above tenants below has to move fast.
Category 3 blackwater calls for full PPE, antimicrobial treatment, and disposal of anything porous that touched the contamination — our Hunter crews are trained for exactly that protocol.
On top of standard drying, our Hunter crews treat affected materials to reduce mold risk and will be upfront if a section needs specialist remediation.
Every Hunter estimate is written and explained before work begins — no vague "we'll see how it goes" pricing.
Local staging inside Hunter, ND means Hunter response times usually beat the national average by a wide margin.
We photograph and log every step specifically so your claim moves faster and you're not the one arguing with the insurance company.
If moisture readings aren't where they should be at the end of the job, we come back and keep drying at no extra charge.
A short call with our Hunter dispatcher tells us whether this is a one-room job or a multi-crew response before anyone drives out.
The closest available technician is routed to your Hunter property with equipment staged and ready.
We remove standing water first, then map moisture and position air movers and dehumidifiers based on the readings.
Daily moisture checks continue until every affected material reads dry, and you get a complete report at the end.
Every Hunter job gets closed based on instrument readings, not a visual check, and we won't call it finished until the numbers say it's finished. If a callback shows lingering moisture within 30 days of a completed job, we return and correct it at no additional charge.
You'll find that exact commitment printed on your Hunter paperwork, not just mentioned over the phone. A repeat visit under this guarantee doesn't mean starting over — we pull the original moisture logs and pick up exactly where the last visit left off.
"We had standing water from a burst water heater and the technician showed up before I even finished mopping the entry way." — Danielle R.
"I didn't touch the claim paperwork once. They sent it straight to the adjuster with photos and moisture logs attached." — Marcus T.
"They showed me the daily moisture readings so I wasn't just trusting a stranger's word that the house was dry." — Priya S.
"Our restaurant flooded from a line break in the kitchen and they had us back open in three days flat." — Aaron W.
"Nobody wants to call about a sewage backup, but they walked me through the containment and PPE process calmly." — Lena G.
"Final bill matched the estimate to the dollar, which is rarer than it should be in this industry." — Sam O.
Most Hunter dispatches are on-site within 60-90 minutes since our crews and equipment are based in-state, not flown or trucked in from elsewhere.
Yes — every Hunter job gets a written estimate before equipment is turned on, and we walk through it with you line by line.
Emergency extraction, structural drying, and sewage/contaminated water cleanup are all available 24/7 for Hunter properties.
Yes, we document everything with photos and moisture readings and can communicate directly with your adjuster.
We take moisture meter readings on affected materials and compare them against the dry standard for that material type — a visual check alone isn't enough.
Blackwater and sewage response is a core part of what our Hunter team does, not a job we sub out.
If it's safe, shut off the water source, move electronics and valuables away from the affected area, and avoid the space if standing water is near outlets.
Commercial response is a regular part of our Hunter work — restaurants, offices, and multi-unit buildings included.
Typical drying time runs 3-5 days for a Hunter home, though a job that sat unaddressed longer can take longer to fully dry.
Quick extraction and drying in Hunter significantly lowers mold risk, since spores need sustained moisture over roughly a day or two to establish.
Yes, if moisture readings aren't at dry standard when we finish, or a callback shows lingering moisture within 30 days, we return at no extra charge.
See the zip codes and nearby cities listed below — our Hunter crews cover that full radius.
Hunter is our home base, and our reach extends across Hunter, ND through a network of staged equipment and on-call technicians. If your address falls inside or near Hunter, a Hirex Water Damage crew can typically respond the same day.
— Embedded service-area map for Hunter, Hunter, NDCall now and speak with a real Hunter dispatcher, not a national call center.
Call +1-844-234-5373